Description
Encoder Interface
Encoder interface DAG 01.2 M evaluates:
• linear and angular scales using the bidirectional interface EnDat
• angle systems as per the SSI standard
If the measuring system is outfitted with the interface EnDat, then set the
S2/4 switch on the printed circuit board to OFF.
If the measuring system works as per the SSI standard, then set the
switch S2/4 to ON.
The pulse frequency depends on the line length.
Select pulse frequency in terms of the following table:
Fig. 7-1: Selecting the pulse frequency
Set pulse frequency using switches S2/1, 2, 3, on the printed circuit board
according to the following table: